Featured
-
Wholesale China Fiber Optic Termination Box Plastic Manufacturers Suppliers – GPJM5-RS Fiber splice enclosure – HTLL
Applications ● Aerial-hanging ● Wall-mounting Product Specifications Item GPJM5-RS Dimension（mm） Φ210×540 Weight（Kg） 3.5 Diameter of Cable(mm) Φ7~Φ22 No. of Cable Inlet/Outlet five Number of Fibers per Tray 24（single core） Max. Number of Trays 4 Max. Number of Fibers 144（single core） 288(Ribbon type) Sealing of Inlet/Outlet ports Heat-shrinkable tube Sealing of Shells Silicon rubber Kit Contents Item Type Quantity Fiber Optic Splice Sleeve Allocated by t... -
Wholesale China 60mm Splice Sleeves Manufacturers Suppliers – Micro Fiber Optic Sleeve For 250um bare fiber – HTLL
Micro Optical Fiber Sleeve is Suitable for bare optical fibers with a diameter of 250 µm.designed specifically for use in optical splitter/coupler or similar packages, with an after shrink diameter of 1.4mm. Stock lengths are 30 & 35mm, but also available in 25, 40mm. This fiber Splice Sleeve is made by hot-melt adhesive – Ethylene Vinyl Acetate (EVA) or Polyethylene (PE) – internally and by irradiation cross-linked polyolefin heat shrinkable tubing externally. There also is a reinforcing... -
Wholesale China Ribbon Fiber Splice Sleeve Manufacturers Suppliers – FTTH Fiber Fusion splice Sleeve for drop cable – HTLL
Technical Data Properties Test Method Typical Data Tensile Strength ASTM D2671 ≥18 MPa Ultimate Elongation ASTM D2671 700% Dielectric Strength IEC 243 20 KV/mm Dielectric Constant IEC 243 2.5max Longitudinal Change ASTM D2671 0±5% Density ISO R1183D 0.94 g/cm3 Specifications ● Inner support steel is made by SUS304 stainless steel ● Working temperature: -45 ~ 110 ℃ ● Shrinking temperature range: 120 ℃ ● Standard color: Clear ● Custom ... -
Wholesale China Ftth Fiber Optic Tool Kits With Power Meter Manufacturers Suppliers – Best sales Fiber Optic Cleaners pen – HTLL
Tips 1. The optical connector ferrule cleaning is Necessity In optical fiber communications, even if the end face of the optical fiber connector plug sticky invisible dirt or small particles, may lead to the optical signal is cut off, or cause the reflected wave fiber damage and even damage the light source, the entire communication cause significant damage to the system, so before the optical fiber connector, you must optical connector ferrule (male), flange (female), the device for cle... -
Wholesale China Fiber Sleeves Splicing Factory Supplier – Clear Single Core Heat Shrink Optic Fiber Splice Protector – HTLL
Features ● Single holed(preshrunk) ends eliminates improper fiber threading. ● Smooth, deburred stainless steel reinforcing member ends decrease the risk of fiber damage during installation. ● Comply with RoHS. ● Extended liner length prevents contact between the fiber and their backbone. ● Clear sleeve design permits easy centering of splice before heating. ● Sealing structure makes the splice free from effect of temperature and humidity from environment. ● Package:12pcs/bag or 100pcs/bag. a... -
Wholesale China Plc Splitter Patch Panel Manufacturers Suppliers – Rack-Mount Fix Fiber Patch Panel – HTLL
Features ● The Fiber Optic Terminal Box is made of high-quality cold-rolled steel plate, thickness of metal is 1.2mm. ● The box surface using epoxy electrostatic spray, corrosion resistant, anti-aging. ● Plastic parts using flame retardant ABS material components. ● Three adaptor plate or 2 is ok. its easy to install and operate. ● The measure of Fiber Optic ODF could be 1U2U3U4U or more. any size and color could be choose, we can provide OEM service. ● You can choice the pigtail and fib... -
Wholesale China Odf 12 Core Patch Panel Factories Manufacturers – Factory Sales Rack Mount Fiber Termination Box – HTLL
Features ● The Shape of Optical Patch Panel with Sliding design.its easy to operate when install. ● Have cover in the front. Its dust-proof. ● High density Fiber Optical Patch Panel.Maximum capacity can reach 96 cores in 1RU height. ● OEM Service.more capacity, more height. it can reach at 4RU. ● Plastic Parts material is High-Quality ABS. ● Available lower density. Functions ● Optical cable introduction, wiring pigtails leading out, fixing and protecting the performance of optical cables, wi... -
Wholesale China Fiber Splitters Factories Manufacturers – Factory sales Fiber Optic PLC splitters – HTLL
Features ● Excellent Mechanical, Small Size ● High Reliability ● Low insertion Loss and low Polarization Dependent loss ● High channel counts ● Excellent Environmental Stability and Widely Used Applications ● Fiber to the home(FTTH) ● Passive optical networks(PON) ● Local area networks(LAN) ● Cable Television( CATV) ● Testing equipment ● FTTX deployments(GPON/BPON/EPON) Parameters Parameter Specification Operating Wavelenght(nm) 1260～1650 Type 1×4 1×8 1×16 2×4 2×8 2×16 1×32 2×32 1×64... -
Wholesale China Fiber Optic Termination Box Manufacturers Suppliers – Custermized Fiber Optic Termination Box – HTLL
Features ● Cold rolled steel plate, electrostatic spray paint. ● Available for 4, 6, 8, 12, 16, 24 cores. ● Can be installed SC FC ST LC and other type adapter. ● Enough radius of curvature. ● Reasonable designing, good protection for pigtail. ● Easy to installation and maintenance. ● Configuration automatic braking devices. ● Dust proof type structure, flexible installation, easy to open and close. ● din rail fiber patch panel Integrated with the functions of the optical fiber splicing, wind... -
Wholesale China Fiber Patch Cord Factories Manufacturers – 2.0mm SX MM Fiber Optic Patch cord – HTLL
A patch cord is a fiber optic cable used to attach one device to another for signal routing. Normally, there are 4 types connector: FC/SC/LC/ST.. 2types ferrule: PC, UPC, FC stands for Fixed Connection. It is fixed by way of threaded barrel housing. FC connectors are generally constructed with a metal housing and are nickel-plated. FC Connectors… SC stands for Subscriber Connector- a general purpose push/pull style connector. It is a square, snap-in connector latches with a simple push-pull... -
Wholesale China Fiber Optic Cable Patch Cord Factories Manufacturers – FTTA jumper-PDLC-DLC Fiber Outdoor Patch cord – HTLL
Optical cable assembly, PDLC/DLC, GYFJH,2B.3.SM 2Core. Outdoor Specification 1. GYFJH Cable 1.1 Structure: 1.2 Application Mainly used in wireless base station horizontal and vertical cabling 1.3 Features ● Good mechanical and environmental characteristics; ● Flame retardant characteristics meet the requirements of relevant standards; ● The mechanical characteristics of jacket meet the requirements of relevant standards; ● Soft, flexible, water blocked, UV resistant, easy to lay and splice,... -
Wholesale China Din Rail Fiber Termination Box Factory Supplier – GPJM5-RS Fiber splice enclosure – HTLL
Applications ● Aerial-hanging ● Wall-mounting Product Specifications Item GPJM5-RS Dimension（mm） Φ210×540 Weight（Kg） 3.5 Diameter of Cable(mm) Φ7~Φ22 No. of Cable Inlet/Outlet five Number of Fibers per Tray 24（single core） Max. Number of Trays 4 Max. Number of Fibers 144（single core） 288(Ribbon type) Sealing of Inlet/Outlet ports Heat-shrinkable tube Sealing of Shells Silicon rubber Kit Contents Item Type Quantity Fiber Optic Splice Sleeve Allocated by t...
