Fiber Optic Sliding Patch Panel
-
5U 23″ to 19″ Rack Reducer
A simple solution for 23″ rack.
How do you install a standard 19” rack equipment in to a 23” relay rack or 23” 4 post cabinet? The answer is simple. You need a RCB1060 series 23” to 19” RACK Reducer. RCB1060 gives you the 2” extension you need for right side and left of your cabinet to fill the gap.
What is a RACK REDUCER ?
RCB1060 PEM Nut 23” to 19” rack reducer is a special 2” wide bracket design for mounting 19” rack equipment in a 23” cabinet. You need two brackets for right and left side of your cabinet to properly install your 19” rack equipment.
Save Money and save enviroment.
If you own a 23” telecom relay rack or 23” 4 post cabinet, you can reuse and repurpose a section for 19” rack application. Your 23” telecom cabinet offers the exact same features as a standard 19” rack cabinet except for the width. By using our RCB1060 PEM nut rack reducer, instead of paying full price for a brand new 19” rack, you only pay fraction of cost for a pair of RCB1060 rack reducer. You are not only saving money, you are also saving the environment by reusing resource. RCB1060 offer size from 1U up to 5U to choose from
-
19inch Custom Rackmount Chassis Fiber Optic Termination Boxes
1.This Fiber Patch panel with two door.
2.its sliding type,easy to operate.
3.Rack Bracket Adjustable with requirements.
4.19inch Custom Rackmount Chassis Fiber Optic Termination Boxes.
-
FTTH 19″ ODF 48 Core FC Fiber Distribution Frame Fiber Optic Patch Panel
1)Two rack mounting ears with their fixing and mounting screws, allow to be adjusted to different positions
2)19 inch 2 RU cabinet´s front cover or cap, with respectives locks (2)
3) 48 FC / UPC adapters
4) 48 pieces, 1.5 meter pigtails G657A2
5) Black color
6) 19-inch cabinet, 482mm x340.6mm x 88.5mm
7) Cabinet´s sliding rails
8) 2pcs 24 Ports fiber optic splice tray with its cover,4 pcs half spool fiber manager
9) Installation accessories bags (install screw, 48pcs fiber heat shrink sleeve,cable tie)
-
Factory Sales Rack Mount Fiber Termination Box
19″ Optic ODF Fiber Panel is designed for both terminal and splicing, accepts whole range of adapters including SC, ST, FC, LC fiber adapters. 2 * Rear cable entries accommodate cables with diameter below 16mm. Inside Fiber Optic Splice Tray stacked and available for 96 cores (for Quadruple LC) terminated inside, and Fiber Half Spool with 35mm bending radius guarantee all modes fiber storage inside with additional low bending loss. Individual front whole adapter plate use screws to fix, easy to assemble and exchange. The metal Frame ODF is made by cold rolled steel1.2 mm, and in 1U finished height.
-
Rack-Mount Fiber Optic Sliding Patch Panel
Regarding Rack-Mount Fiber Optic Sliding Patch Panel, It is used for cable terminal, fixed, asylum and protection of fiber and pigtail splice and the remaining fiber, 19” inch size and Modular design fit for Rack Mount. the forward and backward sliding tray allows installers to access the fiber adapter panels as moves, adds and changes are required. Sliding-Out Rack-Mount Panel Provides a simple, high-density, low profile solution for easy access and management of fiber optic terminations in a IU rack space design.
