Wholesale China Fiber Splitter Distribution Box Factories Manufacturers – 16 Ports Fiber Distribution Box – HTLL

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Optic Fiber Enclosure , FC Pigtail Terminal Box , Rack Enclosure , We've been not pleased while using the present achievements but we are trying finest to innovate to satisfy buyer's much more personalized needs. No matter where you will be from, we have been here to wait for your sort ask for, and welcom to go to our manufacturing facility. Choose us, you can meet your trusted supplier.
Wholesale China Fiber Splitter Distribution Box Factories Manufacturers – 16 Ports Fiber Distribution Box – HTLL Detail:

Environmental requirements

● Waterproof Grading: IP55

● Temperature: -40℃~+60℃

● Humidity: ≤95% (+40℃)

● Atmospheric pressure: 70KPa~108 KPa

● Box size: 205(H)×180 (W) ×50 (D) mm

Function

● The internal use of single-layer structure design, divided into optical distribution area, the introduction of outdoor cable, fixed welding and butterfly-shaped cable coiled storage area. Fiber optic lines clear, do not interfere with each other, to facilitate the construction operation and post-maintenance.

● There are two cable entry holes along the bottom of the box. Can be introduced two outdoor cable and eight butterfly cable. To meet the direct or divergence of outdoor fiber optic cable connection and butterfly-shaped cable connection.

● Fused discs can be configured with 8-core or 12-core capacity to meet the expansion capacity of the cabinet.

● Flange installation to meet the 8-core.

● Butterfly-shaped fiber optic cable fixed unit with card slot structure, can be ordered and butterfly-shaped fiber optic cable laying.

● Box body can be stored about 1 meter butterfly cable, through the wire ring in the box orderly deployment, and to ensure that the bending radius ≥ 30mm.

Installation instructions

Installation: wall-mounted

1. Install four holes in the wall according to the distance between the mounting holes of the backplane and the plastic expansion sleeve.

2. Fix the case to the wall with M8 × 40 screws.

3. Insert the upper positioning hole of the box into the hole of the wall, and fix the box to the wall with the M8 × 40 screw through the box under the box hole.

4. check the cabinet installation, qualified to close the door. To prevent rain from entering the cabinet, tighten the lock cylinder with the key.

5. Introduce the outdoor cable and the butterfly cable according to the construction requirements.

Pole mounting

1. Removing the Cabinet To mount the back plate and the hoop, loosen the harness to the mounting plate.

2. Secure the backplane to the poles with a hoop. In order to prevent accidents, should check the hoop locking pole, solid and reliable, no loosening.

3. Box installation and fiber-optic cable installation and distribution 3.1.3,3.1.4.

4. Open the cabinet

5. The middle finger can be opened by pulling the fastener firmly outwards, and the lower cover can be fastened with the downward force of the finger.

Item

Description

Quantity

Box

GF-B-8D

1 piece

Heat shrink sleeves

Ф1.5×60mm

8 pieces

Protective tube

Φ5

0.5m

Nylon cable ties

3×100mm

4 pieces

Expansion bolts

M8×40mm

4 sets

key

1 piece


Product detail pictures:

Wholesale China Fiber Splitter Distribution Box Factories Manufacturers –  16 Ports Fiber Distribution Box  – HTLL detail pictures

Wholesale China Fiber Splitter Distribution Box Factories Manufacturers –  16 Ports Fiber Distribution Box  – HTLL detail pictures

Wholesale China Fiber Splitter Distribution Box Factories Manufacturers –  16 Ports Fiber Distribution Box  – HTLL detail pictures


Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Wholesale China Fiber Splitter Distribution Box Factories Manufacturers – 16 Ports Fiber Distribution Box – HTLL , The product will supply to all over the world, such as: Paraguay, Cyprus, Islamabad, Strict quality control is executed in each link of the whole production process.We sincerely hope to establish the friendly and mutual-beneficial cooperation with you. Based on high quality products and perfect pre-sales /after-sales service is our idea, some clients had cooperated with us for more than 5 years.
  • Customer service staff and sales man are very patience and they all good at English, product's arrival is also very timely, a good supplier.
    5 Stars By Hedda from Hungary - 2017.08.15 12:36
    The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
    5 Stars By Karen from Irish - 2018.06.03 10:17