Wholesale China Optical Fiber Distribution Box Factory Supplier – 16 Ports Fiber Distribution Box – HTLL
Wholesale China Optical Fiber Distribution Box Factory Supplier – 16 Ports Fiber Distribution Box – HTLL Detail:
Environmental requirements
● Waterproof Grading: IP55
● Temperature: -40℃～+60℃
● Humidity: ≤95% (+40℃)
● Atmospheric pressure: 70KPa～108 KPa
● Box size: 205（H）×180 (W) ×50 (D) mm
Function
● The internal use of single-layer structure design, divided into optical distribution area, the introduction of outdoor cable, fixed welding and butterfly-shaped cable coiled storage area. Fiber optic lines clear, do not interfere with each other, to facilitate the construction operation and post-maintenance.
● There are two cable entry holes along the bottom of the box. Can be introduced two outdoor cable and eight butterfly cable. To meet the direct or divergence of outdoor fiber optic cable connection and butterfly-shaped cable connection.
● Fused discs can be configured with 8-core or 12-core capacity to meet the expansion capacity of the cabinet.
● Flange installation to meet the 8-core.
● Butterfly-shaped fiber optic cable fixed unit with card slot structure, can be ordered and butterfly-shaped fiber optic cable laying.
● Box body can be stored about 1 meter butterfly cable, through the wire ring in the box orderly deployment, and to ensure that the bending radius ≥ 30mm.
Installation instructions
Installation: wall-mounted
1. Install four holes in the wall according to the distance between the mounting holes of the backplane and the plastic expansion sleeve.
2. Fix the case to the wall with M8 × 40 screws.
3. Insert the upper positioning hole of the box into the hole of the wall, and fix the box to the wall with the M8 × 40 screw through the box under the box hole.
4. check the cabinet installation, qualified to close the door. To prevent rain from entering the cabinet, tighten the lock cylinder with the key.
5. Introduce the outdoor cable and the butterfly cable according to the construction requirements.
Pole mounting
1. Removing the Cabinet To mount the back plate and the hoop, loosen the harness to the mounting plate.
2. Secure the backplane to the poles with a hoop. In order to prevent accidents, should check the hoop locking pole, solid and reliable, no loosening.
3. Box installation and fiber-optic cable installation and distribution 3.1.3,3.1.4.
4. Open the cabinet
5. The middle finger can be opened by pulling the fastener firmly outwards, and the lower cover can be fastened with the downward force of the finger.
|
Item |
Description |
Quantity |
|
Box |
GF-B-8D |
1 piece |
|
Heat shrink sleeves |
Ф1.5×60mm |
8 pieces |
|
Protective tube |
Φ5 |
0.5m |
|
Nylon cable ties |
3×100mm |
4 pieces |
|
Expansion bolts |
M8×40mm |
4 sets |
|
key |
1 piece |
Product detail pictures:
Related Product Guide:
We take "customer-friendly, quality-oriented, integrative, innovative" as objectives. "Truth and honesty" is our administration ideal for Wholesale China Optical Fiber Distribution Box Factory Supplier – 16 Ports Fiber Distribution Box – HTLL , The product will supply to all over the world, such as: Sweden, Los Angeles, Korea, Due to the stability of our items, timely supply and our sincere service, we are able to sell our merchandise not only over the domestic market, but also exported to countries and regions, including the Middle East, Asia, Europe and other countries and regions. At the same time, we also undertake OEM and ODM orders. We will do our best to serve your company, and establish a successful and friendly cooperation with you.
By Andrew from Paraguay - 2018.06.26 19:27
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Flora from luzern - 2017.03.28 12:22
