Wholesale China Optical Fiber Distribution Box Manufacturers Suppliers – 16 Ports Fiber Distribution Box – HTLL
Wholesale China Optical Fiber Distribution Box Manufacturers Suppliers – 16 Ports Fiber Distribution Box – HTLL Detail:
Environmental requirements
● Waterproof Grading: IP55
● Temperature: -40℃～+60℃
● Humidity: ≤95% (+40℃)
● Atmospheric pressure: 70KPa～108 KPa
● Box size: 205（H）×180 (W) ×50 (D) mm
Function
● The internal use of single-layer structure design, divided into optical distribution area, the introduction of outdoor cable, fixed welding and butterfly-shaped cable coiled storage area. Fiber optic lines clear, do not interfere with each other, to facilitate the construction operation and post-maintenance.
● There are two cable entry holes along the bottom of the box. Can be introduced two outdoor cable and eight butterfly cable. To meet the direct or divergence of outdoor fiber optic cable connection and butterfly-shaped cable connection.
● Fused discs can be configured with 8-core or 12-core capacity to meet the expansion capacity of the cabinet.
● Flange installation to meet the 8-core.
● Butterfly-shaped fiber optic cable fixed unit with card slot structure, can be ordered and butterfly-shaped fiber optic cable laying.
● Box body can be stored about 1 meter butterfly cable, through the wire ring in the box orderly deployment, and to ensure that the bending radius ≥ 30mm.
Installation instructions
Installation: wall-mounted
1. Install four holes in the wall according to the distance between the mounting holes of the backplane and the plastic expansion sleeve.
2. Fix the case to the wall with M8 × 40 screws.
3. Insert the upper positioning hole of the box into the hole of the wall, and fix the box to the wall with the M8 × 40 screw through the box under the box hole.
4. check the cabinet installation, qualified to close the door. To prevent rain from entering the cabinet, tighten the lock cylinder with the key.
5. Introduce the outdoor cable and the butterfly cable according to the construction requirements.
Pole mounting
1. Removing the Cabinet To mount the back plate and the hoop, loosen the harness to the mounting plate.
2. Secure the backplane to the poles with a hoop. In order to prevent accidents, should check the hoop locking pole, solid and reliable, no loosening.
3. Box installation and fiber-optic cable installation and distribution 3.1.3,3.1.4.
4. Open the cabinet
5. The middle finger can be opened by pulling the fastener firmly outwards, and the lower cover can be fastened with the downward force of the finger.
|
Item |
Description |
Quantity |
|
Box |
GF-B-8D |
1 piece |
|
Heat shrink sleeves |
Ф1.5×60mm |
8 pieces |
|
Protective tube |
Φ5 |
0.5m |
|
Nylon cable ties |
3×100mm |
4 pieces |
|
Expansion bolts |
M8×40mm |
4 sets |
|
key |
1 piece |
Product detail pictures:
Related Product Guide:
Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for Wholesale China Optical Fiber Distribution Box Manufacturers Suppliers – 16 Ports Fiber Distribution Box – HTLL , The product will supply to all over the world, such as: Singapore, Bolivia, Nepal, Our company offers the full range from pre-sales to after-sales service, from product development to audit the use of maintenance, based on strong technical strength, superior product performance, reasonable prices and perfect service, we'll continue to develop, to supply the high-quality goods and services, and promote lasting cooperation with our customers, common development and create a better future.
By Nina from Sheffield - 2018.06.09 12:42
The company's products very well, we have purchased and cooperated many times, fair price and assured quality, in short, this is a trustworthy company!
By Victor Yanushkevich from Eindhoven - 2018.02.12 14:52
